|
|
 |
|
Categories:
 |
 |
IS1U60 (38 KHz IR Detector)
(SKU# 35110)
$3.95 USD
Status: Discontinued
|
|
|
DISCONTINUED BY MANUFACTURER. Please see the PNA4602M for a replacment part.
This sensor is great for lots of different applications. Its primary use is to decode infrared signals modulated at 38 KHz, a frequency used by most remote controls. This unit, like others of it type, are largely replacing the 'metal can' style of IR receiver/demodulators such as the old GP1U5x. This new generation of device is smaller, less expensive, and has better performance.
While this is a 38 KHz unit, its bandpass is such that the loss at 40 KHz is only about 2 dB (relative to 38 KHz). Typical detection range is 5m (straight ahead) and 3m (30 deg. either-side of centre). The IS1U60 contains all the circuitry needed to decode IR remote signals used by most consumer electronics devices (stereos, TVs, VCRs etc.).
The Sharp IS1U60 does NOT measure distances, detect objects or sense color changes. This device takes an incoming IR signal, modulated at 38 KHz, strips-off the carrier and provides the user with a clean, stable data stream that represents the originally encoded data. It is intended for IR data transfer only.
|
|
|
|
|
|
|
 |
 PNA4602M (38 KHz IR Detector)
Price:
$1.60 USD
SKU: PNA4602
|
|
 |
|
 
|
